Cardborad Hydraulic Swing Arm Cutting Machine

               
1.Rotation of swing arm is flexible, and operation and materials selection is convenient.
2.High quality seamless steel tubes are adopted and processed into pillars, which are supported by top and bottom holes, to guarantee the flexible rotation and good reliability of upper beating board.
3.The switch is operated by both hands to guarantee the safety of operators.
4.The swing arm cutting machine use self-lubricating system to reduce wear and extend the service life of the machine.
5.The inertial of flying wheel is used to store energy, which saves the energy.
6.The use of time control allows for simple and convenient setting of cutter depth.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg